Ground Warfare

Milrem Robotics Rolls Out New Medium Class Type-X Robotic Combat Vehicle (RCV)


Milrem Robotics Rolls Out New Medium Class Type-X Robotic Combat Vehicle (RCV)

Share this article

The medium class Type-X Robotic Combat Vehicle developed by the European leading robotics and autonomous systems developer Milrem Robotics passed its initial mobility tests. The Type-X will become an intelligent wingman to main battle tanks and infantry fighting vehicles capable of taking on the most dangerous tasks and positions, which result in lower lethality risk. The Type-X can be fitted with a cannon up to 50 mm. With up to a 30 mm cannon the RCV is also airdroppable – the C-130J and the KC-390 can carry one Type-X, an A400M two and a C-17 5 of them. The Type-X RCV designed to support mechanized units was first announced in the summer of last year. The low weight of 12 tons of the Type-X and high power with efficient power management provide a superior terrain capability and its low height of 2.2 m and a rear engine provide low visual and heat signature.

“The Type-X will provide equal or overmatching firepower and tactical usage to a unit equipped with Infantry Fighting vehicles. It provides means to breach enemy defensive positions with minimal risk for own troops and replacing a lost RCV is purely a logistical nuance,” said Kuldar Väärsi, CEO of Milrem Robotics.

“The vehicle will be equipped with intelligent functions such as follow-me, waypoint navigation, and obstacle detection with Artificial Intelligence being part of the algorithms,” Väärsi said. “Also, Milrem Robotics’ software developers have taken a totally new and innovative approach to allow remote controlled operations on higher speeds.”

Milrem Robotics Rolls Out New Medium Class Type-X Robotic Combat Vehicle (RCV)
Milrem Robotics Rolls Out New Medium Class Type-X Robotic Combat Vehicle (RCV)

In addition, the medium class Type-X Robotic Combat Vehicle is approximately three to four times lighter and its cost significantly lower than that of a conventional IFV. It has been designed with intelligent predictive maintenance combined with a Health and Usage Monitoring System and Line Replacement Unit principle to ensure a low Through Lifecycle Cost and logistic footprint. Also, its hybrid powertrain and rubber tracks will reduce lifecycle costs significantly. To develop the Type-X RCV Milrem Robotics utilized its knowledge gained from developing its flagship product the THeMIS Unmanned Ground Vehicle, intended to support dismounted troops, that has already been acquired by ten countries, seven of which are members of NATO.

Milrem Robotics flagship product the THeMIS unmanned ground vehicle has altogether been delivered to nine countries of which seven are NATO members, including France, Norway, the UK, and the US. Milrem Robotics is also the leader of a consortium that was awarded 30,6 MEUR from the European Commission’s European Defence Industrial Development Programme (EDIDP) to develop a European standardized unmanned ground system (UGS). During the project, titled iMUGS, modular and scalable architecture for hybrid manned-unmanned systems will be developed to standardize a European wide ecosystem for aerial and ground platforms, command, control and communication equipment, sensors, payloads, and algorithms. Milrem Robotics has two offices in Estonia, one in Sweden and Finland and shortly one in the Netherlands.

Leave a Reply

Your email address will not be published. Required fields are marked *